Do you need help with the selection?
Write us
info@doypacky.czor call
+420 325 516 416Mon-Fri: 9:00 - 15:00
Impulse welder Hacona type C
Professional manual impulse welder with cutting knife for sealing foil bags and foils. The welder has a robust aluminium body and is also suitable for high workload operations.
Select a variant
Shop cheaper
166,899 €
without VAT
200,279 €
with VAT
Do you need help with the selection?
Write us
info@doypacky.czor call
+420 325 516 416Mon-Fri: 9:00 - 15:00
Product description
Description
The welder is not suitable for paper bags with AL layer from the 74... series (KRAFT/ AL/ CPP material), as the material is more than 200 my thick and the welder does not pierce it. Other types of bags are sealed by the welder without problems. For sealing the above mentioned bags use the AUDION SEALBOY welder .
Professional manual impulse welder with cutting knife for sealing foil bags and foil. The welder has a robust aluminium body and is also suitable for high workload operations.
The C-type benchtop welder is very easy to operate and requires minimal working space. It is suitable for a wide range of packaging applications in production, order fulfillment or office environments. Simply connect it to a 230V power supply and it is ready for operation.
All Type C machines operate on the pulse sealing principle. The fusing wire is heated only after the sealing bar has been closed. This guarantees maximum safety and energy saving.
Type C impulse machines are available in 5 different lengths. This wide range ensures maximum flexibility in selecting the right machine size. Choose the machine size according to the largest bag size used in the packaging process.
The surface of the machine is powder coated orange. It is suitable for general use and can be used in all industries. If you need a machine with a finish suitable for the food or pharmaceutical industry choose Hacona INOX welders which have a silver anodised finish.
You can purchase a work table for the welder to extend its use.
Thewelder is suitable for:
Doypacks, flat-bottomed and zippered bags, square and flat bags, various types of foils and sleeves
Parameters
Specifications
- Welding machine type Impulse with lever and cutting knife
- Length of heating section 220 mm , 320 mm , 420 mm , 620 mm , 820 mm
- Weld width 2.5 mm
- Cutting knife Yes
- Country of origin Hungary
Downloads
Do you need help with the selection?
Write us
info@doypacky.czor call
+420 325 516 416Mon-Fri: 9:00 - 15:00
SETTING OF THE SEALING LENGTH
With the type C welder you do not set the melting temperature, but only the length of the melting cycle. The length of the fusing cycle depends on the thickness of the material and is set on the controller (scale 1-10). The thicker the material, the longer the fusing time.
The LED light above the rotary knob shows the current status of the welder. If the LED is not lit, the machine is disconnected from the mains (machine is switched off). In this state the machine can be stored or repaired.
By plugging the welder into a power outlet, the LED light turns yellow, i.e. it is in standby mode.
The average consumption in standby mode is approx. 2 W/hr (electricity).
As soon as you press the welding arm, the LED changes from yellow to red. The red LED informs you that the welder is currently melting. After the set interval, the melting stops and the red LED changes back to yellow.
For a perfect weld, we always recommend leaving the arm closed under pressure for 1 - 2 seconds after the fusing cycle is complete. You can then remove the bag and the machine is ready for the next cycle.
Technical information
TYPE | Working width | BAG WIDTH | MAX. OUTPUT | MAX.HEAT | MAX.Welding time | MAX.CAPACITY | VOLTAGE |
---|---|---|---|---|---|---|---|
C-220 | 220 mm | 2.5 mm | 135W | 123°C | 6 sec. | 100 welds / 1hr. | 230V / 50Hz |
C-320 | 320 mm | 2.5 mm | 175 W | 123°C | 6 sec. | 100 welds / 1hr. | 230V / 50Hz |
C-420 | 420 mm | 2.5 mm | 220 W | 123°C | 6 sec. | 100 welds / 1hr. | 230V / 50Hz |
C-620 | 620 mm | 2.5 mm | 320 W | 123°C | 6 sec. | 100 welds / 1hr. | 230V / 50Hz |
C-820 | 820 mm | 2.5 mm | 450 W | 123°C | 6 sec. | 100 welds / 1hr. | 230V / 50Hz |
The maximum material thickness (absolute material thickness) for all Type C welders is:
- PE Polyethylene 200 microns
- PP Polypropylene 200 microns
- Multilayer laminated film 100 microns (depending on the type of lamination!)